|
Anti aging vacuum fractional rf microneedle aesthetic machine AML20
Gold needle carving leads the new fashion of leather anti-aging
Principle:
The interventional gold needle sculpture can precisely act on the aging skin tissue, so that it can shrink, tighten and enhance the effect after receiving thermal stimulation. Later (next three months) further improve skin laxity, sagging and local fat accumulation during collagen regeneration and remodeling.
Instrument features: MTSRF has all the technical features of its international counterparts: dual-frequency, negative-pressure adsorption, non-negative-pressure, inter-needle, co-polar, layered, insulated body of needles, non-insulated body of needles, fractional microneedle function, CRS consumables management.
Technical Parameters：
1.RF
(1) Operating frequency: 700KHz ±20%/2.2MHz ±20%
(2) No-load voltage: 415Vpp/110Vrms ± 10%
(3) Maximum power: 45W
(4) Control mode: constant power
2.Negative pressure: determine whether the working surface is in contact with the skin by the actual air pressure change
(1) Maximum pressure: 29mmHg
(2) Maximum flow rate: 3.6L/min
(3) Noise: <60dB
3. Stroke Thrust:
(1) Maximum stroke: 7.0mm
(2) Maximum pressure: 1.5kg
Consumable life
4. Consumables will be judged to be expired in the following cases:
(1) The number of punctures reaches 1200 rounds;
(2) More than 24 hours have elapsed since the consumable was first plugged into the device;
(3) When the remaining number of rounds is less than 300, the power is cut off.
5. Working environment
(1) Temperature: +5℃~+40
(2) Humidity: ≤80%
(3) Air pressure: 760Pa~1060Pa
(4) Input voltage: AC100V~AC240V
